WPM Bulkhead Union
Grey type push in fitting,pneumatic fitting, push to connect fitting bulkhead union is used to connect two tubes on both ends through a panel in straight line and can easily change the tubing connector direction, provides optimum sealing between the fitting and the panel. The lock nut holds the fitting securely to the bulkhead. push in fitting,pneumatic fitting, push to connect fitting bulkhead union is made of nickel plated brass, stainless steel, grey color POM, and other materials that resist corrosion and wear. Pneumatic fittings, push in fittings, push to connect fittings have a working pressure of up to 150 psi, and can be used with compressed air or inert gas. Push in fittings,pneumatic fittings, push to connect fittings allow a quicker method of connection when compared to compression fitting or hose barb and clamp connections. Simple installation–push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. Accommodate metric tubing O.D ranging from 4 mm to 16 mm, inch tubing O.D ranging from 1/8″ to 1/2″.
All our push-in fittings, pneumatic fittings, push to connect fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.
Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.
| Fluid Admitted | Air, Vacuum, Water (no freezing) |
| Working Pressure | 0—1.0 MPa | 0—150 psi |
| Proof Pressure | 3.0 Mpa | 435 psi |
| Negative Pressure | -100 Kpa | -29.5 In Hg |
| Working Temperature | 0—60°C | 32～140°F |
| Applicable Tube | PU / PA / PE / PVC |
| Body | Nickel Plated Brass |
| Seal, O-ring | NBR |
| Lock Claw | Stainless Steel (SUS) |
| Metric Tube ØD | ||||||||||
| 4mm | 5mm | 6mm | 7mm | 8mm | 9mm | 10mm | 12mm | 14mm | 15mm | 16mm |
| Inch Tube ØD | ||||||
| 1/8″ | 5/32″ | 3/16″ | 1/4″ | 5/16″ | 3/8″ | 1/2″ |
| Part No. | Push-in Tube ΦD(mm) |
| WPM 04 | 4mm |
| WPM 05 | 5mm |
| WPM 06 | 6mm |
| WPM 08 | 8mm |
| WPM 09 | 9mm |
| WPM 10 | 10mm |
| WPM 12 | 12mm |
| WPM 14 | 14mm |
| WPM 15 | 15mm |
| WPM 16 | 16mm |
| Part No. | Push-in Tube ΦD(Inch) |
| WPM 1/8 | 1/8″ |
| WPM 5/32 | 5/32″ |
| WPM 3/16 | 3/16″ |
| WPM 1/4 | 1/4″ |
| WPM 5/16 | 5/16″ |
| WPM 3/8 | 3/8″ |
| WPM 1/2 | 1/2″ |
| Part# | ØD | B | E | R | H |
| WPM 04 | 4 | 30 | 8 | M12X1 | 14 |
| WPM 06 | 6 | 33 | 10 | M14X1 | 17 |
| WPM 08 | 8 | 36.8 | 12 | M16X1 | 19 |
| WPM 10 | 10 | 44.5 | 15 | M20X1 | 24 |
| WPM 12 | 12 | 46 | 16 | M22X1 | 27 |
| Part# | ØD | B | E | R | H |
| WPM 5/32 | 5/32 | 30 | 8 | M12X1 | 9/16 |
| WPM 1/4 | 1/4 | 33 | 10 | M14X1 | 11/16 |
| WPM 5/16 | 5/16 | 36.8 | 12 | M16X1 | 3/4 |
| WPM 3/8 | 3/8 | 44.5 | 15 | M20X1 | 7/8 |
| WPM 1/2 | 1/2 | 46 | 16 | M22X1 | 1 |
*Information contained herein may be changed without prior notification.
