WPLM Equal Bulkhead Union Elbow
Grey type push in fitting, pneumatic fitting, push to connect fitting bulkhead union elbow connects two tubes on both ends through a panel and change tube direction at 90-degree angles. Bulkhead union elbow push in fitting, pneumatic fitting, push to connect fitting bodies are made of nickel plated brass and strong grey color thermoplastic (PBT), POM release sleeve and have stainless steel tube gripping claws. Simple installation–push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. External tightening with a flat wrench. Accommodate metric tubing O.D ranging from 4 mm to 16 mm, inch tubing O.D ranging from 1/8″ to 1/2″.
All our push-in fittings, pneumatic fittings, push to connect fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.
Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.
| Fluid Admitted | Air, Vacuum, Water (no freezing) |
| Working Pressure | 0—1.0 MPa | 0—150 psi |
| Proof Pressure | 3.0 Mpa | 435 psi |
| Negative Pressure | -100 Kpa | -29.5 In Hg |
| Working Temperature | 0—60°C | 32～140°F |
| Applicable Tube | PU / PA / PE / PVC |
| Body | Nickel Plated Brass |
| Seal, O-ring | NBR |
| Lock Claw | Stainless Steel (SUS) |
| Metric Tube ØD | ||||||||||
| 4mm | 5mm | 6mm | 7mm | 8mm | 9mm | 10mm | 12mm | 14mm | 15mm | 16mm |
| Inch Tube ØD | ||||||
| 1/8″ | 5/32″ | 3/16″ | 1/4″ | 5/16″ | 3/8″ | 1/2″ |
Metric Tube (mm)
| Part No. | Push-in Tube ΦD(mm) |
| WPLM 04 | 4mm |
| WPLM 06 | 6mm |
| WPLM 08 | 8mm |
| WPLM 10 | 10mm |
| WPLM 12 | 12mm |
| WPLM 14 | 14mm |
| WPLM 15 | 15mm |
| WPLM 16 | 16mm |
Inch Tube
| Part No. | Push-in Tube ΦD(Inch) |
| WPLM 1/8 | 1/8″ |
| WPLM 5/32 | 5/32″ |
| WPLM 3/16 | 3/16″ |
| WPLM 1/4 | 1/4″ |
| WPLM 5/16 | 5/16″ |
| WPLM 3/8 | 3/8″ |
| WPLM 1/2 | 1/2″ |
