WPKD Triple Branch Reduced Male Elbow
Grey type push in fitting, pneumatic fitting, push to connect fitting triple branch reduced male elbow is used to connect a tube to a female thread connection inline to three smaller tube connections at a right angle. Different from PKB, connection of two different tube diameter. Using manifold you can easily make a departure, for three tubes, from the main line. Tightening with a flat wrench. Triple branch reduced male elbow push in fitting, pneumatic fitting, push to connect fitting can be rotated after installation to allow for variations in piping direction. Push in fitting, pneumatic fitting, push to connect fitting triple branch reduced male elbow is made of nickel plated brass and strong grey color thermoplastic (PBT) and has grey color POM release sleeve, stainless steel tube gripping claw. Pre-coated Teflon threads are ready to use without additional sealing. Push in fittings are easy to install and release. Simple installation–push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. Accommodate metric tubing O.D ranging from 4 mm to 12 mm, inch tubing O.D ranging from 1/8″ to 1/2″. External tightening with a flat wrench. Thread sizes range from BSPT1/8 to BSPT1/2.
All our push-in fittings, pneumatic fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.
Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.
| Fluid Admitted | Air, Vacuum, Water (no freezing) |
| Working Pressure | 0—1.0 MPa | 0—150 psi |
| Proof Pressure | 3.0 Mpa | 435 psi |
| Negative Pressure | -100 Kpa | -29.5 In Hg |
| Working Temperature | 0—60°C | 32～140°F |
| Applicable Tube | PU / PA / PE / PVC |
| Body | Nickel Plated Brass |
| Seal, O-ring | NBR |
| Lock Claw | Stainless Steel (SUS) |
| Metric Tube ØD | ||||||||||
| 4mm | 5mm | 6mm | 7mm | 8mm | 9mm | 10mm | 12mm | 14mm | 15mm | 16mm |
| Inch Tube ØD | ||||||
| 1/8″ | 5/32″ | 3/16″ | 1/4″ | 5/16″ | 3/8″ | 1/2″ |
| Thread Standard and Type | |||||||||||
| R, PT, BSPT — 55° Taper Pipe Thread | Metric Thread* | ||||||||||
| R1/8 | R1/4 | R3/8 | R1/2 | M5x0.8 | M6x1 | M8x1 | M10x1 | M12x1.25 | M14x1.5 | M16x1.5 | M20x1.5 |
| Part No. | Push-in Tube ΦD1(mm) | Push-in Tube ΦD2(mm) | Thread (PT, R, BSPT) |
| WPKD 06-04-01 | 6mm | 4mm | R1/8 |
| WPKD 06-04-02 | 6mm | 4mm | R1/4 |
| WPKD 08-06-01 | 8mm | 6mm | R1/8 |
| WPKD 08-06-02 | 8mm | 6mm | R1/4 |
| WPKD 08-06-03 | 8mm | 6mm | R3/8 |
| WPKD 10-08-01 | 10mm | 8mm | R1/8 |
| WPKD 10-08-02 | 10mm | 8mm | R1/4 |
| WPKD 10-08-03 | 10mm | 8mm | R3/8 |
| WPKD 12-10-02 | 12mm | 10mm | R1/4 |
| WPKD 12-10-03 | 12mm | 10mm | R3/8 |
| WPKD 12-10-04 | 12mm | 10mm | R1/2 |
| Part No. | Push-in Tube ΦD1(Inch) | Push-in Tube ΦD2(Inch) | Thread (PT, R, BSPT) |
| WPKD 1/4-5/32-01 | 1/4″ | 5/32″ | R1/8 |
| WPKD 1/4-5/32-02 | 1/4″ | 5/32″ | R1/4 |
| WPKD 5/16-1/4-01 | 5/16″ | 1/4″ | R1/8 |
| WPKD 5/16-1/4-02 | 5/16″ | 1/4″ | R1/4 |
| WPKD 5/16-1/4-03 | 5/16″ | 1/4″ | R3/8 |
| WPKD 3/8-5/16-01 | 3/8″ | 5/16″ | R1/8 |
| WPKD 3/8-5/16-02 | 3/8″ | 5/16″ | R1/4 |
| WPKD 3/8-5/16-03 | 3/8″ | 5/16″ | R3/8 |
| WPKD 1/2-3/8-02 | 1/2″ | 3/8″ | R1/4 |
| WPKD 1/2-3/8-03 | 1/2″ | 3/8″ | R3/8 |
| WPKD 1/2-3/8-04 | 1/2″ | 3/8″ | R1/2 |
| Part# | ØD1 | ØD2 | B | E | A | R | F | ØP | H |
| WPKD06-04-01 | 6 | 4 | 63.1 | 19 | 7 | R1/8 | 35.8 | 13.4 | 12 |
| WPKD06-04-02 | 6 | 4 | 66.5 | 19 | 9.5 | R1/4 | 35.8 | 13.4 | 14 |
| WPKD08-06-01 | 8 | 6 | 70.5 | 20.2 | 7 | R1/8 | 42.8 | 15 | 14 |
| WPKD08-06-02 | 8 | 6 | 74 | 20.2 | 9.5 | R1/4 | 42.8 | 15 | 14 |
| WPKD08-06-03 | 8 | 6 | 75 | 20.2 | 10 | R3/8 | 42.8 | 15 | 17 |
| WPKD10-08-01 | 10 | 8 | 86.5 | 23.8 | 7 | R1/8 | 49.6 | 18.8 | 14 |
| WPKD10-08-02 | 10 | 8 | 89.5 | 23.8 | 9.5 | R1/4 | 49.6 | 18.8 | 14 |
| WPKD10-08-03 | 10 | 8 | 90.5 | 23.8 | 10 | R3/8 | 49.6 | 18.8 | 17 |
| WPKD12-10-02 | 12 | 10 | 104 | 29 | 9.5 | R1/4 | 59.6 | 21 | 17 |
| WPKD12-10-03 | 12 | 10 | 105.5 | 29 | 10 | R3/8 | 59.6 | 21 | 17 |
| WPKD12-10-04 | 12 | 10 | 110 | 29 | 13 | R1/2 | 59.6 | 21 | 21 |
