WPKB Triple Branch Male Elbow
Grey type push in fitting, pneumatic fitting, push to connect fitting triple branch male elbow is used to connect three branch line in same direction from female thread at 90 degree angles, you can easily make air distribution from the main line for the three tubes. External tightening with a flat wrench. Tripe male branch pneumatic fitting can be rotated after installation to allow for variations in piping direction. Push in fitting, pneumatic fitting, push to connect fitting tripe male branch is made of nickel plated brass and strong grey color thermoplastic (PBT) and has grey color POM release sleeve, stainless steel tube gripping claw. Pre-coated Teflon threads are ready to use without additional sealing. Push in fittings, pneumatic fittings, push to connect fittings are easy to install and release. Simple installation–push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. Accommodate metric tubing O.D ranging from 4 mm to 10 mm, inch tubing O.D ranging from 1/8″ to 3/8″. External tightening with a flat wrench. Thread sizes range from R, PT, BSPT 1/8 to R, PT, BSPT 1/2.
All our push-in fittings, pneumatic fittings,push to connect fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.
Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.
| Fluid Admitted | Air, Vacuum, Water (no freezing) |
| Working Pressure | 0—1.0 MPa | 0—150 psi |
| Proof Pressure | 3.0 Mpa | 435 psi |
| Negative Pressure | -100 Kpa | -29.5 In Hg |
| Working Temperature | 0—60°C | 32～140°F |
| Applicable Tube | PU / PA / PE / PVC |
| Body | Nickel Plated Brass |
| Seal, O-ring | NBR |
| Lock Claw | Stainless Steel (SUS) |
| Metric Tube ØD | ||||||||||
| 4mm | 5mm | 6mm | 7mm | 8mm | 9mm | 10mm | 12mm | 14mm | 15mm | 16mm |
| Inch Tube ØD | ||||||
| 1/8″ | 5/32″ | 3/16″ | 1/4″ | 5/16″ | 3/8″ | 1/2″ |
| Thread Standard and Type | |||||||||||
| R, PT, BSPT — 55° Taper Pipe Thread | Metric Thread* | ||||||||||
| R1/8 | R1/4 | R3/8 | R1/2 | M5x0.8 | M6x1 | M8x1 | M10x1 | M12x1.25 | M14x1.5 | M16x1.5 | M20x1.5 |
| Part No. | Push-in Tube ΦD(mm) | Thread (PT, R, BSPT) |
| WPKB 04-M5 | 4mm | M5 |
| WPKB 04-M6 | 4mm | M6 |
| WPKB 04-01 | 4mm | R1/8 |
| WPKB 04-02 | 4mm | R1/4 |
| WPKB 06-M5 | 6mm | M5 |
| WPKB 06-M6 | 6mm | M6 |
| WPKB 06-01 | 6mm | R1/8 |
| WPKB 06-02 | 6mm | R1/4 |
| WPKB 06-03 | 6mm | R3/8 |
| WPKB 06-04 | 6mm | R1/2 |
| WPKB 08-01 | 8mm | R1/8 |
| WPKB 08-02 | 8mm | R1/4 |
| WPKB 08-03 | 8mm | R3/8 |
| WPKB 08-04 | 8mm | R1/2 |
| WPKB 10-01 | 10mm | R1/8 |
| WPKB 10-02 | 10mm | R1/4 |
| WPKB 10-03 | 10mm | R3/8 |
| WPKB 10-04 | 10mm | R1/2 |
| Part No. | Push-in Tube ΦD(Inch) | Thread (PT, R, BSPT) |
| WPKB 5/32-M5 | 5/32″ | M5 |
| WPKB 5/32-M6 | 5/32″ | M6 |
| WPKB 5/32-01 | 5/32″ | R1/8 |
| WPKB 5/32-02 | 5/32″ | R1/4 |
| WPKB 1/4-M5 | 1/4″ | M5 |
| WPKB 1/4-M6 | 1/4″ | M6 |
| WPKB 1/4-01 | 1/4″ | R1/8 |
| WPKB 1/4-02 | 1/4″ | R1/4 |
| WPKB 1/4-03 | 1/4″ | R3/8 |
| WPKB 1/4-04 | 1/4″ | R1/2 |
| WPKB 5/16-01 | 5/16″ | R1/8 |
| WPKB 5/16-02 | 5/16″ | R1/4 |
| WPKB 5/16-03 | 5/16″ | R3/8 |
| WPKB 5/16-04 | 5/16″ | R1/2 |
| WPKB 3/8-01 | 3/8″ | R1/8 |
| WPKB 3/8-02 | 3/8″ | R1/4 |
| WPKB 3/8-03 | 3/8″ | R3/8 |
| WPKB 3/8-04 | 3/8″ | R1/2 |
| Part No. | Push-in Tube ΦD(mm) | Thread (Metric) |
| WPKB 04-M5X0.8 | 4mm | M5X0.8 |
| WPKB 04-M6X1.0 | 4mm | M6X1.0 |
| WPKB 04-M8X1.0 | 4mm | M8X1.0 |
| WPKB 04-M8X1.25 | 4mm | M8X1.25 |
| WPKB 04-M10X1.0 | 4mm | M10X1.0 |
| WPKB 04-M10X1.25 | 4mm | M10X1.25 |
| WPKB 04-M12X1.25 | 4mm | M12X1.25 |
| WPKB 04-M12X1.5 | 4mm | M12X1.5 |
| WPKB 06-M5X0.8 | 6mm | M5X0.8 |
| WPKB 06-M6X1.0 | 6mm | M6X1.0 |
| WPKB 06-M8X1.0 | 6mm | M8X1.0 |
| WPKB 06-M8X1.25 | 6mm | M8X1.25 |
| WPKB 06-M10X1.0 | 6mm | M10X1.0 |
| WPKB 06-M10X1.25 | 6mm | M10X1.25 |
| WPKB 06-M12X1.25 | 6mm | M12X1.25 |
| WPKB 06-M12X1.5 | 6mm | M12X1.5 |
| WPKB 06-M14X1.5 | 6mm | M14X1.5 |
| WPKB 06-M16X1.5 | 6mm | M16X1.5 |
| WPKB 06-M20X1.5 | 6mm | M20X1.5 |
| WPKB 08-M8X1.0 | 8mm | M8X1.0 |
| WPKB 08-M8X1.25 | 8mm | M8X1.25 |
| WPKB 08-M10X1.0 | 8mm | M10X1.0 |
| WPKB 08-M10X1.25 | 8mm | M10X1.25 |
| WPKB 08-M12X1.25 | 8mm | M12X1.25 |
| WPKB 08-M12X1.5 | 8mm | M12X1.5 |
| WPKB 08-M14X1.5 | 8mm | M14X1.5 |
| WPKB 08-M16X1.5 | 8mm | M16X1.5 |
| WPKB 08-M20X1.5 | 8mm | M20X1.5 |
| WPKB 10-M8X1.0 | 10mm | M8X1.0 |
| WPKB 10-M8X1.25 | 10mm | M8X1.25 |
| WPKB 10-M10X1.0 | 10mm | M10X1.0 |
| WPKB 10-M10X1.25 | 10mm | M10X1.25 |
| WPKB 10-M12X1.25 | 10mm | M12X1.25 |
| WPKB 10-M12X1.5 | 10mm | M12X1.5 |
| WPKB 10-M14X1.5 | 10mm | M14X1.5 |
| WPKB 10-M16X1.5 | 10mm | M16X1.5 |
| WPKB 10-M20X1.5 | 10mm | M20X1.5 |
| Part# | ØD | B | E | A | R | F | ØP | H |
| WPKB 04-01 | 4 | 63.1 | 19 | 7 | R1/8 | 35.8 | 13.4 | 12 |
| WPKB 04-02 | 4 | 66.5 | 19 | 9.5 | R1/4 | 35.8 | 13.4 | 14 |
| WPKB 06-01 | 6 | 70.5 | 20.2 | 7 | R1/8 | 42.8 | 15 | 14 |
| WPKB 06-02 | 6 | 74 | 20.2 | 9.5 | R1/4 | 42.8 | 15 | 14 |
| WPKB 06-03 | 6 | 75 | 20.2 | 10 | R3/8 | 42.8 | 15 | 17 |
| WPKB 08-01 | 8 | 86.5 | 23.8 | 7 | R1/8 | 49.6 | 18.8 | 14 |
| WPKB 08-02 | 8 | 89.5 | 23.8 | 9.5 | R1/4 | 49.6 | 18.8 | 14 |
| WPKB 08-03 | 8 | 90.5 | 23.8 | 10 | R3/8 | 49.6 | 18.8 | 17 |
| WPKB 10-02 | 10 | 104 | 29 | 9.5 | R1/4 | 59.6 | 21 | 17 |
| WPKB 10-03 | 10 | 105.5 | 29 | 10 | R3/8 | 59.6 | 21 | 17 |
| WPKB 10-04 | 10 | 110 | 29 | 13 | R1/2 | 59.6 | 21 | 21 |
