WPH Male Banjo Elbow
Grey type push in fitting, pneumatic fitting, push to connect fitting male banjo elbow is used to connects a tube to a female threaded port at 90-degree angles. Hexagon head on the top allows tightening by using an Allen wrench in confined spaces. Male banjo elbow pneumatic fitting can be rotated after installation to allow for variations in piping direction. Push in fitting, pneumatic fitting, push to connect fitting male banjo elbow is made of nickel plated brass and strong grey color thermoplastic (PBT) and has grey color POM release sleeve, stainless steel tube gripping claw. Pre-coated Teflon threads are ready to use without additional sealing. Push in fittings, pneumatic fittings, push to connect fittings are easy to install and release. Simple installation–push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. Accommodate metric tubing O.D ranging from 4 mm to 12 mm, inch tubing O.D ranging from 1/8″ to 1/2″. Thread sizes range from R, PT, BSPT 1/8 to R, PT, BSPT 1/2.
All our push-in fittings, pneumatic fittings, push to connect fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.
Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.
| Fluid Admitted | Air, Vacuum, Water (no freezing) |
| Working Pressure | 0—1.0 MPa | 0—150 psi |
| Proof Pressure | 3.0 Mpa | 435 psi |
| Negative Pressure | -100 Kpa | -29.5 In Hg |
| Working Temperature | 0—60°C | 32～140°F |
| Applicable Tube | PU / PA / PE / PVC |
| Body | Nickel Plated Brass |
| Seal, O-ring | NBR |
| Lock Claw | Stainless Steel (SUS) |
| Metric Tube ØD | ||||||||||
| 4mm | 5mm | 6mm | 7mm | 8mm | 9mm | 10mm | 12mm | 14mm | 15mm | 16mm |
| Inch Tube ØD | ||||||
| 1/8″ | 5/32″ | 3/16″ | 1/4″ | 5/16″ | 3/8″ | 1/2″ |
| Thread Standard and Type | |||||||||||
| R, PT, BSPT — 55° Taper Pipe Thread | Metric Thread* | ||||||||||
| R1/8 | R1/4 | R3/8 | R1/2 | M5x0.8 | M6x1 | M8x1 | M10x1 | M12x1.25 | M14x1.5 | M16x1.5 | M20x1.5 |
| Part No. | Push-in Tube ΦD(mm) | Thread (PT, R, BSPT) |
| WPH 04-M5 | 4mm | M5 |
| WPH 04-M6 | 4mm | M6 |
| WPH 04-01 | 4mm | R1/8 |
| WPH 04-02 | 4mm | R1/4 |
| WPH 06-M5 | 6mm | M5 |
| WPH 06-M6 | 6mm | M6 |
| WPH 06-01 | 6mm | R1/8 |
| WPH 06-02 | 6mm | R1/4 |
| WPH 06-03 | 6mm | R3/8 |
| WPH 06-04 | 6mm | R1/2 |
| WPH 08-01 | 8mm | R1/8 |
| WPH 08-02 | 8mm | R1/4 |
| WPH 08-03 | 8mm | R3/8 |
| WPH 08-04 | 8mm | R1/2 |
| WPH 10-01 | 10mm | R1/8 |
| WPH 10-02 | 10mm | R1/4 |
| WPH 10-03 | 10mm | R3/8 |
| WPH 10-04 | 10mm | R1/2 |
| WPH 12-02 | 12mm | R1/4 |
| WPH 12-03 | 12mm | R3/8 |
| WPH 12-04 | 12mm | R1/2 |
| Part No. | Push-in Tube ΦD(Inch) | Thread (PT, R, BSPT) |
| WPH 5/32-M5 | 5/32″ | M5 |
| WPH 5/32-M6 | 5/32″ | M6 |
| WPH 5/32-01 | 5/32″ | R1/8 |
| WPH 5/32-02 | 5/32″ | R1/4 |
| WPH 1/4-M5 | 1/4″ | M5 |
| WPH 1/4-M6 | 1/4″ | M6 |
| WPH 1/4-01 | 1/4″ | R1/8 |
| WPH 1/4-02 | 1/4″ | R1/4 |
| WPH 1/4-03 | 1/4″ | R3/8 |
| WPH 1/4-04 | 1/4″ | R1/2 |
| WPH 5/16-01 | 5/16″ | R1/8 |
| WPH 5/16-02 | 5/16″ | R1/4 |
| WPH 5/16-03 | 5/16″ | R3/8 |
| WPH 5/16-04 | 5/16″ | R1/2 |
| WPH 3/8-01 | 3/8″ | R1/8 |
| WPH 3/8-02 | 3/8″ | R1/4 |
| WPH 3/8-03 | 3/8″ | R3/8 |
| WPH 3/8-04 | 3/8″ | R1/2 |
| WPH 1/2-02 | 1/2″ | R1/4 |
| WPH 1/2-03 | 1/2″ | R3/8 |
| WPH 1/2-04 | 1/2″ | R1/2 |
| Part# | ØD | E | B | ØP | A | R | H |
| WPH 04-M5 | 4 | 20 | 17 | 11 | 4 | M5 | 8 |
| WPH 04-M6 | 4 | 20 | 17 | 11 | 4.1 | M6 | 8 |
| WPH 04-01 | 4 | 22.5 | 26 | 11 | 7 | R1/8 | 12 |
| WPH 04-02 | 4 | 24 | 23.5 | 11 | 9.5 | R1/4 | 14 |
| WPH 06-M5 | 6 | 22 | 17 | 13.4 | 4 | M5 | 8 |
| WPH 06-M6 | 6 | 22 | 17 | 13.4 | 4.1 | M6 | 8 |
| WPH 06-01 | 6 | 23 | 23.5 | 13.4 | 7 | R1/8 | 12 |
| WPH 06-02 | 6 | 25 | 26 | 13.4 | 9.5 | R1/4 | 14 |
| WPH 06-03 | 6 | 27 | 31.5 | 13.4 | 10 | R3/8 | 19 |
| WPH 08-01 | 8 | 25.5 | 23.5 | 15 | 7 | R1/8 | 12 |
| WPH 08-02 | 8 | 28.5 | 26 | 15 | 9.5 | R1/4 | 14 |
| WPH 08-03 | 8 | 29.5 | 31.5 | 15 | 10 | R3/8 | 19 |
| WPH 08-04 | 8 | 32.5 | 38.5 | 15 | 13 | R1/2 | 24 |
| WPH 10-01 | 10 | 30 | 23.5 | 18.8 | 7 | R1/8 | 12 |
| WPH 10-02 | 10 | 32 | 26 | 18.8 | 9.5 | R1/4 | 14 |
| WPH 10-03 | 10 | 33 | 31.5 | 18.8 | 10 | R3/8 | 19 |
| WPH 10-04 | 10 | 36 | 38.5 | 18.8 | 13 | R1/2 | 21 |
| WPH 12-02 | 12 | 34 | 26 | 21 | 9.5 | R1/4 | 14 |
| WPH 12-03 | 12 | 35.5 | 31.5 | 21 | 10 | R3/8 | 19 |
| WPH 12-04 | 12 | 36.5 | 38.5 | 21 | 13 | R1/2 | 24 |
