Pneumatic Fittings, Push in Fittings – PLM Bulkhead Union Elbow
PLM Bulkhead Union Elbow is a kind of generally used pneumatic fittings and push in fittings. PLM Bulkhead Union Elbow connects two tubes through a panel, changing by 90° in a tubing fetching direction. Accommodate metric tubing O.D ranging from 4mm to 16mm, inch tubing O.D ranging from 1/8″ to 1/2″.


Application
1. One-touch joints used in pneumatic piping.
2. Used for a wide variety of modes to meet all needs.
Features
1. Quick installation, simple and flexible, space-saving, easy to connect tube by one touch.
2. Even after installation, the direction of tubing can be changed freely, all tapered threads are pre-coated with Teflon with fine seal performance.
3. Nickel-Plated brass body ensures anti-corrosion and anti-contamination.
4. Fittings are equipped with a Gasket, O-ring and Teflon-treatment on the thread.
Specification | ||
Fluid | Air, Vaccum | |
Pressure Range | 0~1.0 MPa | 0~150 PSI |
Negative Pressure | -100 Kpa(-750Torr) | -29.5 ln Hg |
Max Pressure | 1.5 Mpa | 250PSI |
Temperature Range | 0 ~ 60 ℃ | 32~140F |
Applicable Tube | PU (Polyurethane) | PA (Nylon) |
Metric Tube ØD |
4mm | 5mm | 6mm | 7mm | 8mm | 9mm | 10mm | 12mm | 14mm | 15mm | 16mm |
Inch Tube ØD |
1/8″ | 5/32″ | 3/16″ | 1/4″ | 5/16″ | 3/8″ | 1/2″ |