BSPP one touch tube fittings male banjo y (pneumatic fittings) is used to connect two tubes at a 90° angle to a female thread. External tightening with a flat wrench or a socket wrench. The thread can be immediately quality sealed by equipping with an O-ring.
| Metric Tube ØD | ||||||||||
| 4mm | 5mm | 6mm | 7mm | 8mm | 9mm | 10mm | 12mm | 14mm | 15mm | 16mm |
| Inch Tube ØD | ||||||
| 1/8″ | 5/32″ | 3/16″ | 1/4″ | 5/16″ | 3/8″ | 1/2″ |
| Thread Standard and Type | |||
| BSPP, G — 55° Parallel Pipe Thread | |||
| G1/8 | G1/4 | G3/8 | G1/2 |
Metric Tube (mm)–Thread (BSPP, G)
| Part No. | Tube ΦD | Thread (BSPP, G) |
| PHY 04-G01 | 4mm | G1/8 |
| PHY 04-G02 | 4mm | G1/4 |
| PHY 06-G01 | 6mm | G1/8 |
| PHY 06-G02 | 6mm | G1/4 |
| PHY 06-G03 | 6mm | G3/8 |
| PHY 06-G04 | 6mm | G1/2 |
| PHY 08-G01 | 8mm | G1/8 |
| PHY 08-G02 | 8mm | G1/4 |
| PHY 08-G03 | 8mm | G3/8 |
| PHY 08-G04 | 8mm | G1/2 |
| PHY 10-G01 | 10mm | G1/8 |
| PHY 10-G02 | 10mm | G1/4 |
| PHY 10-G03 | 10mm | G3/8 |
| PHY 10-G04 | 10mm | G1/2 |
| PHY 12-G02 | 12mm | G1/4 |
| PHY 12-G03 | 12mm | G3/8 |
| PHY 12-G04 | 12mm | G1/2 |
Inch Tube (inch) –Thread (BSPP, G)
| Part No. | Tube ΦD | Thread (BSPP, G) |
| PHY 5/32-G01 | 5/32 | G1/8 |
| PHY 5/32-G02 | 5/32 | G1/4 |
| PHY 3/16-G01 | 3/16 | G1/8 |
| PHY 3/16-G02 | 3/16 | G1/4 |
| PHY 3/16-G03 | 3/16 | G3/8 |
| PHY 1/4-G01 | 1/4 | G1/8 |
| PHY 1/4-G02 | 1/4 | G1/4 |
| PHY 1/4-G03 | 1/4 | G3/8 |
| PHY 1/4-G04 | 1/4 | G1/2 |
| PHY 5/16-G01 | 5/16 | G1/8 |
| PHY 5/16-G02 | 5/16 | G1/4 |
| PHY 5/16-G03 | 5/16 | G3/8 |
| PHY 5/16-G04 | 5/16 | G1/2 |
| PHY 3/8-G01 | 3/8 | G1/8 |
| PHY 3/8-G02 | 3/8 | G1/4 |
| PHY 3/8-G03 | 3/8 | G3/8 |
| PHY 3/8-G04 | 3/8 | G1/2 |
| PHY 1/2-G02 | 1/2 | G1/4 |
| PHY 1/2-G03 | 1/2 | G3/8 |
| PHY 1/2-G04 | 1/2 | G1/2 |