Push in Fittings PH Male Banjo
Push in Fittings PH Male Banjo a tubing at a 90° angle to a female threaded port. Male banjo is tightened on the top of the fitting by use of a flat wrench or a socket wrench. Accommodate metric tubing O.D ranging from 4mm to 16mm, inch tubing O.D ranging from 1/8″ to 1/2″. Male banjo is a common used part in the series of pneumatic fititngs and push in fittings.
Features:
1)Suitable for any tubes.
2)Easy steps to take tubes off.
3)Once inserted to the nut,the tube would not easily loose
4)Nickel-plated metal body ensures anti-corrosion and anti- contamination
5)All R and NPT threads are pre-coated sealant
6)Quick and simple tube insertion
7)Compact,lightweight design
8)Advanced, well-proven tube retaining system
9)Re-usable thread seal
Applications:
1.One touch type connection tool for air pressure pipe
2.Various uses depending on the user’s environment
Working Medium ：Air(No other gases or liquids)
Working pressure: 0~150PSI 0~10bar
Working temperature: 32~140 o F 0~60oC
Applicable Tube: Polyurethane and Nylon
| Metric Tube ØD | ||||||||||
| 4mm | 5mm | 6mm | 7mm | 8mm | 9mm | 10mm | 12mm | 14mm | 15mm | 16mm |
| Inch Tube ØD | ||||||
| 1/8″ | 5/32″ | 3/16″ | 1/4″ | 5/16″ | 3/8″ | 1/2″ |
| Thread Standard and Type | |||||||||||
| R, PT, BSPT — 55° Taper Pipe Thread | Metric Thread | ||||||||||
| R1/8 | R1/4 | R3/8 | R1/2 | M5 x 0.8 | M6 x 1 | M8 x 1 | M10 x 1 | M12 x 1.25 | M14 x 1.5 | M16 x 1.5 | M20 x 1.5 |
| UNF | NPT — 60° American Standard Taper Pipe Thread | ||||||||||
| 10-32UNF | NPT1/8 | NPT1/4 | NPT3/8 | NPT1/2 | |||||||