DOTPL Swivel Male Elbow
D.O.T push in tube fitting swivel male elbow has a push-to-connect tube connection on one end and a pre-coated male National Pipe Taper (NPT) thread on the other end for connecting to female threaded pipes at 90-degree angles. This D.O.T air brake push in tube fitting swivel male elbow can be rotated after installation. When installing, ensure tubing ends are cut squarely and free from burrs; to remove, hold down the top of the insert against the fitting body then pull out the tubing. This D.O.T push to connect fitting meets Department of Transportation (DOT) FMVSS 571.106 technical specifications. These D.O.T push in fittings are intended for use in pneumatic circuits for truck and trailers : air suspension, braking systems, transmissions, locking doors and windows, seat adjustment, instrumentation, air conditioning systems, horn, wiper motors, valves, cylinders and accessories. Accommodate inch tubing O.D ranging from 5/32″ to 1/2″. Thread sizes range is from 10-32 UNF, 1/8 NPT to 1/2 NPT. External tightening with a flat wrench.
- Simple tube connection and disconnection – no tools required
- Reduced assembly & maintenance times provide time/labor savings
- Elbows and tees available with 360° swivel
- Reusable: Can be connected and disconnected several times.
