DFSUSE Union Tee
Stainless steel compression tube fitting union tee is used to connect two tubes at 90-degree angles to a third tube with the same diameter. Stainless steel compression tube fitting union tee is made of 316 stainless steel for resistance to scaling and corrosion. Stainless steel compression tube fitting has a double ferrule construction to reduce the possibility of leakage. Stainless steel compression tube fitting is suitable for use in high-pressure and high-temperature applications. Stainless steel compression tube fitting are compatible with stainless steel, carbon steel, copper, rigid and semi-rigid plastic tube. Accommodate metric tube O.D ranging from 4 mm to 16 mm and inch (imperial) tube O.D from 1/8″ to 1/2″.
| Fluid Admitted | Air, Water, Oil, Fuel, Compressed Air, Chemicals, Disinfectants or Food Drinks |
| Max Working Pressure | 400 bar | 6000 psi Depending on The Tubing Material |
| Working Temperature | -73°C—316°C | -100°F—600°F Depending on The Tubing Material |
| Body | Stainless Steel 304/316 |
| Front Ferrule | Stainless Steel 304/316 |
| Back Ferrule | Stainless Steel 304/316 |
| Nut | Stainless Steel 304/316 |
| Applicable Tube | Stainless Steel, Carbon Steel, Copper, Aluminum and Teflon Tube |
| Part No. | Tube ΦD |
| DFSUSE 04 | 4mm |
| DFSUSE 06 | 6mm |
| DFSUSE 08 | 8mm |
| DFSUSE 10 | 10mm |
| DFSUSE 12 | 12mm |
| DFSUSE 14 | 14mm |
| DFSUSE 16 | 16mm |
| Part No. | Tube ΦD |
| DFSUSE 1/8 | 1/8″ |
| DFSUSE 5/32 | 5/32″ |
| DFSUSE 3/16 | 3/16″ |
| DFSUSE 1/4 | 1/4″ |
| DFSUSE 5/16 | 5/16″ |
| DFSUSE 3/8 | 3/8″ |
| DFSUSE 1/2 | 1/2″ |
