WPDF-G Female Run Tee
Grey type BSPP, BSP, G thread push in fitting, push to connect BSPP, BSP, G thread fitting female run tee has a female BSPP, G thread on one end for connecting to a male threaded connection, and two air hose connections, one just opposite to threaded connection, and the other running at 90-degree angles. BSPP, G thread push in fitting, push to connect BSPP, BSP, G thread fitting female run tee has a strong grey color thermoplastic (PBT) body; stainless steel tube lock claws, collars and grey color POM release button offer a quick hold and release mechanism to provide a low disconnection force for easy removal of the tubing. BSPP, BSP, G threaded components are nickel-plated brass. The body of female run tee can be rotated after installation to allow for variations in piping direction. BSPP, BSP, G thread push in fitting, push to connect BSPP, BSP, G thread fittings are easy to install and release. Simple installation–push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. External tightening with a flat wrench. Accommodate metric tube O.D ranging from 4 mm to 16 mm, inch tube O.D ranging from 1/8″ to 1/2″. Thread sizes range from G, BSP, BSPP 1/8 to G, BSP, BSPP 1/2.
All our BSPP, BSP, G thread push-in fittings, pneumatic fittings, push to connect fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.
Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.
| Fluid Admitted | Air, Vacuum, Water (no freezing) |
| Working Pressure | 0—1.0 MPa | 0—150 psi |
| Proof Pressure | 3.0M pa | 435 psi |
| Negative Pressure | -100Kpa | -29.5 In Hg |
| Working Temperature | 0—60°C | 32～140°F |
| Applicable Tube | PU / PA / PE / PVC |
| Body | Nickel Plated Brass |
| Seal, O-ring | NBR |
| Lock Claw | Stainless Steel(SUS) |
| Metric Tube ØD | ||||||||||
| 4mm | 5mm | 6mm | 7mm | 8mm | 9mm | 10mm | 12mm | 14mm | 15mm | 16mm |
| Inch Tube ØD | ||||||
| 1/8″ | 5/32″ | 3/16″ | 1/4″ | 5/16″ | 3/8″ | 1/2″ |
| Thread Standard and Type | |||
| G, BSP, BSPP — 55° Taper Pipe Thread | |||
| G1/8 | G1/4 | G3/8 | G1/2 |
| Part No. | Push-in Tube ΦD(mm) | Thread (BSPP, G) |
| WPDF 04-G01 | 4mm | G1/8 |
| WPDF 04-G02 | 4mm | G1/4 |
| WPDF 06-G01 | 6mm | G1/8 |
| WPDF 06-G02 | 6mm | G1/4 |
| WPDF 06-G03 | 6mm | G3/8 |
| WPDF 06-G04 | 6mm | G1/2 |
| WPDF 08-G01 | 8mm | G1/8 |
| WPDF 08-G02 | 8mm | G1/4 |
| WPDF 08-G03 | 8mm | G3/8 |
| WPDF 08-G04 | 8mm | G1/2 |
| WPDF 10-G01 | 10mm | G1/8 |
| WPDF 10-G02 | 10mm | G1/4 |
| WPDF 10-G03 | 10mm | G3/8 |
| WPDF 10-G04 | 10mm | G1/2 |
| WPDF 12-G01 | 12mm | G1/8 |
| WPDF 12-G02 | 12mm | G1/4 |
| WPDF 12-G03 | 12mm | G3/8 |
| WPDF 12-G04 | 12mm | G1/2 |
| WPDF 14-G02 | 14mm | G1/4 |
| WPDF 14-G03 | 14mm | G3/8 |
| WPDF 14-G04 | 14mm | G1/2 |
| WPDF 15-G02 | 15mm | G1/4 |
| WPDF 15-G03 | 15mm | G3/8 |
| WPDF 15-G04 | 15mm | G1/2 |
| WPDF 16-G02 | 16mm | G1/4 |
| WPDF 16-G03 | 16mm | G3/8 |
| WPDF 16-G04 | 16mm | G1/2 |
| Part No. | Push-in Tube ΦD(Inch) | Thread (BSPP, G) |
| WPDF 1/8-G01 | 1/8″ | G1/8 |
| WPDF 1/8-G02 | 1/8″ | G1/4 |
| WPDF 5/32-G01 | 5/32″ | G1/8 |
| WPDF 5/32-G02 | 5/32″ | G1/4 |
| WPDF 3/16-G01 | 3/16″ | G1/8 |
| WPDF 3/16-G02 | 3/16″ | G1/4 |
| WPDF 3/16-G03 | 3/16″ | G3/8 |
| WPDF 1/4-G01 | 1/4″ | G1/8 |
| WPDF 1/4-G02 | 1/4″ | G1/4 |
| WPDF 1/4-G03 | 1/4″ | G3/8 |
| WPDF 1/4-G04 | 1/4″ | G1/2 |
| WPDF 5/16-G01 | 5/16″ | G1/8 |
| WPDF 5/16-G02 | 5/16″ | G1/4 |
| WPDF 5/16-G03 | 5/16″ | G3/8 |
| WPDF 5/16-G04 | 5/16″ | G1/2 |
| WPDF 3/8-G01 | 3/8″ | G1/8 |
| WPDF 3/8-G02 | 3/8″ | G1/4 |
| WPDF 3/8-G03 | 3/8″ | G3/8 |
| WPDF 3/8-G04 | 3/8″ | G1/2 |
| WPDF 1/2-G01 | 1/2″ | G1/8 |
| WPDF 1/2-G02 | 1/2″ | G1/4 |
| WPDF 1/2-G03 | 1/2″ | G3/8 |
| WPDF 1/2-G04 | 1/2″ | G1/2 |
| Part# | ØD | E | B | ØP | A | G | H |
| WPDF 04-G01 | 4 | 18 | 43 | 11 | 7 | G1/8 | 14 |
| WPDF 04-G02 | 4 | 18 | 46 | 11 | 9.5 | G1/4 | 17 |
| WPDF 06-G01 | 6 | 19 | 45 | 13.4 | 7 | G1/8 | 14 |
| WPDF 06-G02 | 6 | 19 | 47.5 | 13.4 | 9.5 | G1/4 | 17 |
| WPDF 06-G03 | 6 | 19 | 48.5 | 13.4 | 10 | G3/8 | 21 |
| WPDF 06-G04 | 6 | 19 | 53 | 13.4 | 13 | G1/2 | 24 |
| WPDF 08-G01 | 8 | 23 | 51.5 | 15 | 7 | G1/8 | 14 |
| WPDF 08-G02 | 8 | 23 | 55 | 15 | 9.5 | G1/4 | 17 |
| WPDF 08-G03 | 8 | 23 | 56 | 15 | 10 | G3/8 | 21 |
| WPDF 08-G04 | 8 | 23 | 59 | 15 | 13 | G1/2 | 24 |
| WPDF 10-G01 | 10 | 27.5 | 62 | 18.8 | 7 | G1/8 | 17 |
| WPDF 10-G02 | 10 | 27.5 | 65 | 18.8 | 9.5 | G1/4 | 17 |
| WPDF 10-G03 | 10 | 27.5 | 66.5 | 18.8 | 10 | G3/8 | 21 |
| WPDF 10-G04 | 10 | 27.5 | 69.5 | 18.8 | 13 | G1/2 | 24 |
| WPDF 12-G01 | 12 | 29.5 | 66 | 21 | 7 | G1/8 | 21 |
| WPDF 12-G02 | 12 | 29.5 | 68 | 21 | 9.5 | G1/4 | 21 |
| WPDF 12-G03 | 12 | 29.5 | 68.5 | 21 | 10 | G3/8 | 24 |
| WPDF 12-G04 | 12 | 29.5 | 71.5 | 21 | 13 | G1/2 | 24 |
| WPDF 14-G02 | 14 | 31 | 72.5 | 26 | 9.5 | G1/4 | 24 |
| WPDF 14-G03 | 14 | 31 | 73 | 26 | 10 | G3/8 | 24 |
| WPDF 14-G04 | 14 | 31 | 76 | 26 | 13 | G1/2 | 24 |
| WPDF 15-G02 | 15 | 31 | 72.5 | 26 | 9.5 | G1/4 | 24 |
| WPDF 15-G03 | 15 | 31 | 73 | 26 | 10 | G3/8 | 24 |
| WPDF 15-G04 | 15 | 31 | 76 | 26 | 13 | G1/2 | 24 |
| WPDF 16-G02 | 16 | 31 | 72.5 | 26 | 9.5 | G1/4 | 24 |
| WPDF 16-G03 | 16 | 31 | 73 | 26 | 10 | G3/8 | 24 |
| WPDF 16-G04 | 16 | 31 | 76 | 26 | 13 | G1/2 | 24 |
