WPL Male Elbow Swivel
Grey type push in fitting, pneumatic fitting, push to connect fitting male elbow swivel is widely used in pneumatic circuit, connects a tube to a female threaded connection at right angle. Push to connect fitting male elbow has a push-to-connect tube connection on one end and a pre-coated male thread on the other end. Tightening with a flat wrench. Male elbow push in fitting, pneumatic fitting, push to connect fitting can be rotated after installation to allow for variations in piping direction. Push in fitting, pneumatic fitting, push to connect fitting male elbow is made of nickel plated brass and strong grey color thermoplastic (PBT) and has grey color POM release sleeve, stainless steel tube gripping claw. Pre-coated Teflon threads are ready to use without additional sealing. Push in pneumatic fittings are easy to install and release. Simple installation–push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. Accommodate metric tubing O.D ranging from 4 mm to 16 mm, inch tubing O.D ranging from 1/8″ to 1/2″. Thread sizes range from R, PT, BSPT 1/8 to R, PT, BSPT 1/2. External tightening with a flat wrench.
All our push-in fittings, pneumatic fittings, push to connect fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.
Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.
| Fluid Admitted | Air, Vacuum, Water (no freezing) |
| Working Pressure | 0—1.0 MPa | 0—150 psi |
| Proof Pressure | 3.0 Mpa | 435 psi |
| Negative Pressure | -100 Kpa | -29.5 In Hg |
| Working Temperature | 0—60°C | 32～140°F |
| Applicable Tube | PU / PA / PE / PVC |
| Body | Nickel Plated Brass |
| Seal, O-ring | NBR |
| Lock Claw | Stainless Steel (SUS) |
| Metric Tube ØD | ||||||||||
| 4mm | 5mm | 6mm | 7mm | 8mm | 9mm | 10mm | 12mm | 14mm | 15mm | 16mm |
| Inch Tube ØD | ||||||
| 1/8″ | 5/32″ | 3/16″ | 1/4″ | 5/16″ | 3/8″ | 1/2″ |
| Thread Standard and Type | |||||||||||
| R, PT, BSPT — 55° Taper Pipe Thread | Metric Thread* | ||||||||||
| R1/8 | R1/4 | R3/8 | R1/2 | M5x0.8 | M6x1 | M8x1 | M10x1 | M12x1.25 | M14x1.5 | M16x1.5 | M20x1.5 |
Metric Tube – R, BSPT Thread
| Part No. | Push-in Tube ΦD(mm) | Thread (PT, R, BSPT) |
| WPL 04-M5 | 4mm | M5 |
| WPL 04-M6 | 4mm | M6 |
| WPL 04-01 | 4mm | R1/8 |
| WPL 04-02 | 4mm | R1/4 |
| WPL 06-M5 | 6mm | M5 |
| WPL 06-M6 | 6mm | M6 |
| WPL 06-01 | 6mm | R1/8 |
| WPL 06-02 | 6mm | R1/4 |
| WPL 06-03 | 6mm | R3/8 |
| WPL 06-04 | 6mm | R1/2 |
| WPL 08-01 | 8mm | R1/8 |
| WPL 08-02 | 8mm | R1/4 |
| WPL 08-03 | 8mm | R3/8 |
| WPL 08-04 | 8mm | R1/2 |
| WPL 10-01 | 10mm | R1/8 |
| WPL 10-02 | 10mm | R1/4 |
| WPL 10-03 | 10mm | R3/8 |
| WPL 10-04 | 10mm | R1/2 |
| WPL 12-01 | 12mm | R1/8 |
| WPL 12-02 | 12mm | R1/4 |
| WPL 12-03 | 12mm | R3/8 |
| WPL 12-04 | 12mm | R1/2 |
| WPL 14-02 | 14mm | R1/4 |
| WPL 14-03 | 14mm | R3/8 |
| WPL 14-04 | 14mm | R1/2 |
| WPL 15-02 | 15mm | R1/4 |
| WPL 15-03 | 15mm | R3/8 |
| WPL 15-04 | 15mm | R1/2 |
| WPL 16-02 | 16mm | R1/4 |
| WPL 16-03 | 16mm | R3/8 |
| WPL 16-04 | 16mm | R1/2 |
Inch Tube – R, BSPT Thread
| Part No. | Push-in Tube ΦD(Inch) | Thread (PT, R, BSPT) |
| WPL 1/8-M5 | 1/8″ | M5 |
| WPL 1/8-M6 | 1/8″ | M6 |
| WPL 1/8-01 | 1/8″ | R1/8 |
| WPL 1/8-02 | 1/8″ | R1/4 |
| WPL 5/32-M5 | 5/32″ | M5 |
| WPL 5/32-M6 | 5/32″ | M6 |
| WPL 5/32-01 | 5/32″ | R1/8 |
| WPL 5/32-02 | 5/32″ | R1/4 |
| WPL 3/16-M5 | 3/16″ | M5 |
| WPL 3/16-M6 | 3/16″ | M6 |
| WPL 3/16-01 | 3/16″ | R1/8 |
| WPL 3/16-02 | 3/16″ | R1/4 |
| WPL 3/16-03 | 3/16″ | R3/8 |
| WPL 1/4-M5 | 1/4″ | M5 |
| WPL 1/4-M6 | 1/4″ | M6 |
| WPL 1/4-01 | 1/4″ | R1/8 |
| WPL 1/4-02 | 1/4″ | R1/4 |
| WPL 1/4-03 | 1/4″ | R3/8 |
| WPL 1/4-04 | 1/4″ | R1/2 |
| WPL 5/16-01 | 5/16″ | R1/8 |
| WPL 5/16-02 | 5/16″ | R1/4 |
| WPL 5/16-03 | 5/16″ | R3/8 |
| WPL 5/16-04 | 5/16″ | R1/2 |
| WPL 3/8-01 | 3/8″ | R1/8 |
| WPL 3/8-02 | 3/8″ | R1/4 |
| WPL 3/8-03 | 3/8″ | R3/8 |
| WPL 3/8-04 | 3/8″ | R1/2 |
| WPL 1/2-01 | 1/2″ | R1/8 |
| WPL 1/2-02 | 1/2″ | R1/4 |
| WPL 1/2-03 | 1/2″ | R3/8 |
| WPL 1/2-04 |
